page75

1.   Walk toward the door at a normal pace. The door should open before you         reach the threshold.
2.   Stand motionless in threshold at least 10 seconds. The door should not         close.
3.    Inspect the threshold area. It should be clean with no lose parts that might         trip or cause user to fall. Keep traffic path clear.
4.    Move clear of the area. The door should remain open for at least 1.5         seconds and should close slowly and smoothly.
5.    Inspect the glass and safety decals. All should be present and in good         condition.
6.    Repeat steps 1 through 5 from other direction if door if door is used for         two way traffic.
7.     Have door inspected by an AAADM certified inspector at least annually.

DO NOT USE DOOR if it fails any of these safety checks or if it malfunctions in any way. Call a qualified automatic door service company to have door repaired or serviced.

SAFETY INFORMATION FOR AUTOMATIC SWING DOORS

These minimum safety checks, in addition to those in the owners manual, should be made each day and after any loss if electrical power.

1.    Walk toward the door at a normal pace. The door should open before         you reach the threshold.
2.    Stand motionless in threshold at least 10 seconds. The door should not         close.
3.    Walk past the threshold into swing area and stop for 10 seconds. Door         should remain open.
4.     Move clear of the area. The door should remain open for at least 1.5         seconds and should close slowly and smoothly. If two-way traffic, move         toward swing side of door. Door should open well before you reach the         swing path.
5.     Inspect the threshold area. It should be clean with no lose parts that might         trip or cause user to fall. Keep traffic path clear.
6.     Inspect the glass, safety decals guide rails and finger guards. All should be         present and in good condition.
7.     Have door inspected by an AAADM certified inspector at least annually.

DO NOT USE DOOR if it fails any of these safety checks or if it malfunctions in any way.Call a qualified automatic door service company to have door repaired or serviced.

SAFETY INFORMATION FOR AUTOMATIC FOLDING DOORS

These minimum safety checks, in addition to those in the owners manual, should be made each day and after any loss if electrical power.

1.     Walk toward the door at a normal pace. The door should open before         you reach the threshold.
2.     Stand motionless in threshold at least 4 seconds. The door should not         close.
3.     Walk past the threshold into folding area and stop for 10 seconds. Door         should remain open.
4.     Move clear of the area. The door should remain open for at least 1.5         seconds and should close slowly and smoothly. If two-way traffic, move         toward folding side of door. Door should open well before you reach the fold         path.
5.     Inspect the threshold area. It should be clean with no lose parts that might         trip or cause user to fall. Keep traffic path clear.
6.     Inspect the glass, safety decals guide rails and finger guards. All should be         present and in good condition.

Have door inspected by an AAADM certified inspector at least annually.

DO NOT USE DOOR if it fails any of these safety checks or if it malfunctions in any way. Call a qualified automatic door service company to have door repaired or serviced.

LOCATION FOR "SAFETY INFORMATION" LABELS

Place labels in protected, visible location on the door frame near the on/off switch, if possible.

LOCATION FOR "ANNUAL COMPLIANCE INSPECTION" LABELS

Place labels directly underneath the "Safety Information" labels in the space provided on the label or, if no space is provided, on the door frame. This label is only placed on doors that comply with the standard and pass protection.